Contact person: Christina

Tel: +86-531-87981596

Fax: +86-531-87981596

Cel: +86-18615627569(WhatsApp)

Skype: salestzjd

Address: Qianfang Industry park, South River town, Tengzhou city, Shandong, China.

Fabric Laser 1610

1. USB Interface, with mass storage device;

improve working-speed & working efficiency.

2. Taiwan HIWIN linear guide rail & high-speed stepper motor drivers,

the engraving/cutting edges were all smoothly enough.

3. Double heads engraving, improve the working-efficiency.

4. Use scientific design and high-strength steel frame structure.

Product Features:

1. Continuous & rapid curve cutting function; selecting shortest path function.

2. This machine for engraving cloth rolls and it adopts the new high-efficiency laser tube, the laser beam

is more stable than the traditional type.

3.The mechanical structure is strong and stable, making the machine to run at high precision.

4.The electrical ability is stable, the engraving speed is high, and the precision is high.

5. Advanced DSP control system, professional motion control chip, consecutive high speed curve cutting

and the shortest path selection function improve the working efficiency a lot.

6. LaserCut software compatibility with AutoCAD/Coredraw/Cam/Photoshop/Taijima designing program, output designs directly.

7. USB Interface, with mass storage device; improve working-speed & working efficiency.

8. Taiwan HIWIN linear guide rail & high-speed stepper motor drivers, the engraving/cutting edges were

all smoothly enough.

9. Double heads engraving, improve the working-efficiency.

10.Use scientific design and high-strength steel frame structure, guarantee the machine from distortion.

Technical Specification:

Model	TZJD-1610
Working area	*1600mm1000mm**
Laser power	60w/80w/100w, *2
Laser type	CO2 Sealed laser tube , 10.6μm, water-cooled
Cooling type	Water-cooling/Water chiller
Engraving speed	0-60000mm/min
Cutting speed	0-50000mm/min
Total power	2KW/H
Drive motors	Stepper/Servo(option)
Laser output control	0-100% set by software
Min. engraving size	Chinese: 1.5mm1.5mm， English letter: 1.0mm1.0mm
Highest scanning precision	4000DPI
Locating accuracy	≤+0.01mm
Controlling software	DSP control system
Operating software	LaserCut
Graphic format supported	DST PLT BMP DXF DWG AI LAS,etc
Compatible software	CORELDRAW,PHOTOSHOP, AUTOCAD,TAJIMA,etc.
Color separation	Yes
Drive system	High-precision 3-phase stepper motor
Auxiliary equipments	Exhaust fan and air exhaust pipe, red-dot position system, focus lens & reflection mirrors, Auto feeding system, etc.
Power supply	Ac110v/AC220V±10%, 50HZ/60HZ
Working environment	Temperature:0-45℃, Humidity 5-95%(No condensate water)
Working table	Honeycomb table/Knife bar
Interface	PCI USB
Machine available	rotary device, UP & DOWN system, auto-focus device, etc.