1. If the cnc router machine working exceed 1o hours per day, must guarantee the cooling water under cleaning & the water pump under well-operating.
In order to prevent the water temperature was high enough, remember to change cooled water at regular time.
2. There will be certain dust on Working table & transmission system after long-term operating; please remember to clean it.
Meantime please also oil pumping on XYZ axis at regular time.
3. If the cnc router machine was not use long-term, please also oil pumping & guarantee XYZ axis moving; just confirm the flexible about the transmission system.
4. Please clean the electrical cabinet at regular time; check the all wires & screws under perfect situation. Just guarantee the safety about electic circuit.
5. Don’t forget to chek the all screws on the machine fasten enough.